Impulse & Cycling test stand

Date: 03 Dec 2009
Standard: · ISO 6803 · SAE J 343 · SAE J 1405 Application: · For impulse test on automobile steering hose, brake hose, air-conditioner hose, fuel pipe, cooling water pipe, radiator hose, heater hose, air filter hose, turbo, Booster system hose , engineering hydraulic hose, aerospace hose & hose assemblies, other pipes or end fittings , heat exchanger , air conditioner, filter, etc Technical data: · Max impulse pressure: 70Mpa (Accuracy: 0.1Mpa) · Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional) · Frequency: 0~1.5Hz (Depends on the total volume & physical character. · Ambient temperature: Normal Temp or -40~150±3℃ · Medium temperature: Normal Temp~150±3℃ or -40~150±3℃ · Test pieces: 2-8 pcs (Depends on the total volume & physical character. · Test medium: Hydraulic oil or DOT · Pulsing cycles: >10 million cycles · Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)Mounting mode: 1800 or 900 (As per the standard) · Dimension:3modules: · PC console: customized size · Power station: 1800mm×1200mm×1600mm · Test Chamber:1500mm×900mm×1000mm Features: · Fully automated test stand with high speed data acquisition system. · History screen and real-time display of pressure-time curves. · Test data saved automatically when emergency or power down happens accidently. · Multi-samples can be tested independently at a time. · From the control theory to the quality, advanced electrical components guarantee high test precision and stability. · IVS test software is programmable, stable and reliable. · Automatic pressure maintaining reduced the working time of motor and pressurizing section, enhanced the stability, life time and pressure precision of whole testingsystem. · Equipment features overpressure/overload protection. · Auto stop testing when a rupture occurs, prevent the operators and equipment from damages to the utmost. · Automatically drain the air off remained in the test specimen at the beginning of the test. · Providing with various of fixtures to satisfy the connecting of hose and hose assemblies. · Installing distance adjustable freely as per hoses'minimum bend radius and test standards. · Impulse test with monflexing or without flexing. *(Optional)
Contact information:
IVS Flow Control Cor,Ltd
Shenzhen, Guangdong[518108]
Send message
Membership: Sign In, Or Register now.
[ Close ]   [ Print ]   [ Top ]
Best Viewed With Internet Explorer 6.0
© 2008 DRS iNNOVATIONS GROUP LTD. All Rights Reserved